Hi all
we are configuring two MST200 and we need that 2 vlans pass throught the antenas.
This antennas are connected to a Nortel 3524 Switch.
We have done the configs with the port on the switch to be trunk mode ( allowed both vlans) and also tried to trunk the port on Aruba to be alowwed both vlans.
Is this sufficient to be able to have traffic on both vlans ?
We are only having traffic on data vlan 1 , vlan 4 that is voip , is not getting to the other side.
Since i am new to this MST´s , am I missing some config?
Regards