Greetings.
I am working on my inherited Aruba setup with two master and two local controllers. I'm trying to create multiple captive portal pages for one SSID. Our AP's are on location specific subnets, ie 192.168.1.x /24, .2.x /24, etc with all wireless clients in every location pulling IP addresses from the same huge vlan, ie 172.16.0.x /18.
Is there a way to have different captive portal pages based on IP of the AP, not the client? In other words, if a client is coming from an AP in the 192.168.3.x network, they get a different CP page than the clients coming from an AP in the 172.16.5.x network? Or should each location have a different SSID, CP page and everything?
In another post, Colin Joseph suggested "Your approach will be determined by how many unique locations you have to display "welcome to: " for. If it is just a few locations, you can have a different initial role for each location and each initial role will have a different Captive Portal Authentication profile, which will have a different page", but I'm unsure how to accomplish this.
Any suggestions very welcome.
Thanks, Scott C.