Comware

 View Only
last person joined: yesterday 

Expand all | Collapse all

My boot is erase

This thread has been viewed 0 times
  • 1.  My boot is erase

    Posted Oct 11, 2021 09:27 AM

    Hello,

     

    I have an HPE 5130 switch and accidentally deleted the boot file.

    Therefore the switch no longer wants to reboot. It is under version 3506p11 and I cannot deliver it to him.

    How can I do ?

     

    Thank you


    #Commware
    #Switch_Router_Interconnect


  • 2.  RE: My boot is erase

    EMPLOYEE


  • 3.  RE: My boot is erase

    EMPLOYEE
    Posted Oct 11, 2021 11:23 AM

    Hello @fouji,

    As @-Alex- mentioned, you need to upload the software by using xmodem method.

    You need to go to boot menu to upload.

    Below is the 3506P11 software version release ntoes and refer pg. 99  section 'Using XMODEM to upgrade software through the console port'.

    https://support.hpe.com/hpesc/public/docDisplay?docId=a00110768en_us

     

    Thanks!



  • 4.  RE: My boot is erase

    EMPLOYEE
    Posted Oct 11, 2021 02:04 PM

    Hi @fouji !

    Actually you don't NEED to use XModem method, you CAN use it, though it's not the most optimal one. There is much faster procedure - "Using TFTP to upgrade software images through the Ethernet port". It takes minutes, not hours like with XModem. More information can be found here - https://support.hpe.com/hpesc/public/docDisplay?docId=a00116471en_us , page 99.