Wireless Access

 View Only
last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Newly Upgraded 7005 controller cant save access vlans

This thread has been viewed 4 times

  • 1.  Newly Upgraded 7005 controller cant save access vlans

    Posted Feb 27, 2024 08:48 AM

    Hello All, Sorry if this is not the appropriate forum,

    I recently upgraded my 8.3 7005 controller to 8.9. That factory reset my controller.

    Im trying to change the access vlans on the rear of the unit.

    so

    conf t

    int gig 0/0/3

    switchport access vlan 64

    end

    when i show run | b interface it still lists the port in access vlan 1. What am i doing wrong?



  • 2.  RE: Newly Upgraded 7005 controller cant save access vlans

    EMPLOYEE
    Posted Feb 27, 2024 08:54 AM

    Did you "write memory" to commit the change to the running config before looking at the running configuration? 



    ------------------------------
    Josh
    ------------------------------

    Original Message