The Average values are calculated based on the datapoints to the time of report or time of client session whichever is met first.
If you are looking at usage, Signal quality of current client or historical client, it will be in the Client > Monitoring page.
Original Message:
Sent: Jul 10, 2024 11:43 AM
From: UPV-EHU UPV-EHU
Subject: Non-summarized Client Session Report AirWave
Hi,
I was lookingo the same information, but can obtain SNR, RSSI, or packet lost information related to each client session.
Do you know the mapping for those metrics?
- avg. usage (kbps)
- avg. signadl (dBm)
- avg. signal quality
All the information is at the controller, but I can not find it at the airwave.
Thanks for your help.
Leire
Original Message:
Sent: May 14, 2024 11:34 AM
From: Gowri Amujuri
Subject: Non-summarized Client Session Report AirWave
Hi,
In Client Session Report, there's Advanced options, click 'show' to see the option to 'Include details about every client'. Set that to yes and select the columns that are needed in the report. This will provide details of every session.
The reason those options are hidden is because of the load it generates. The more the clients and/or sessions, the report can be very huge and can cause perfromance issues to the server.
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/bc1f1622a87e4f9593323c9776a04b0b.png)
------------------------------
Regards
Gowri Amujuri
Original Message:
Sent: May 14, 2024 04:47 AM
From: Riflooping
Subject: Non-summarized Client Session Report AirWave
Hello,
I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session.
Is there a way to get this ?
Thanks!