Comware

Hi,

Have 3x OfficeConnect 1950 (48 port PoE & non-PoE models) currently stacked via 10GbE Base-T using ports 51 & 52 on each switch.

I want to free up these 10GbE ports and use the SFP+ ports (49 & 50) instead.

My concern is that re-configuring the stack ports, i may overwrite some config on one of the switches... wondering what the best way to do this would be and whether or not there are any special considerations or caveats i should look for?

Bonus question:
If i also wanted to add a 4th 1950 switch to the stack, what's the best way to do this? Keeping in mind, this 4th switch already has a working config that i need to keep when adding to the stack...

Any advice or help would be much appreciated, thanks!

Hi,

Is this switch follows comware command line?

Kindly share product number 'JXXXXX' of the switch.

Thanks!

yes it does!

You can and a 4th switch similarily as in here:

https://www.youtube.com/watch?v=-IcmyQXtvlw&list=LL9PcdKiwO-U4BwhMBIFJ0hg&index=27&t=369s

Check out this series of videos, they are super helpful!

Unfortunately I have requested the 6th video (referenced in the 5th video) in the series but I never received a response in the Youtube channel.

Maybe HP people reading here can pull the srings to help to publishing it?

Hi,

You can refer my post into below link:

This is a similar kind of requirement and but its for HPE 5800 switch. but IRF concept reamins same.

https://community.hpe.com/t5/comware-based/hp-5800-irf-configuration/m-p/7094730#M12872

Thanks!

---

@akg7 wrote:

Hi,

You can refer my post into below link:

This is a similar kind of requirement and but its for HPE 5800 switch. but IRF concept reamins same.

https://community.hpe.com/t5/comware-based/hp-5800-irf-configuration/m-p/7094730#M12872

 

Thanks!  Telldunkin

 

 

---

Wow, it’s very helpful blog for comments. Will try to follow all these stuff! 

Hi,

Has my post helped you to answer your query?

Thanks!