Controllerless Networks

 View Only
last person joined: 4 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Optimal RF configuration IAP-335

This thread has been viewed 1 times

  • 1.  Optimal RF configuration IAP-335

    Posted Mar 13, 2018 07:26 AM

    Hi everyone. Hope all is well with you. I was wondering what would be the optimal RF configuration for two IAP-335 deployed in a 4,300 sqft brick apartment. They are connected to a Humax modem through a TP-Link 8p POE+ switch. The modem is connected to the ISP providing 250mb down / 20mb up. Below, it's the current config. Thank you in advance.

    Airtime Fairness Mode: preferred Access

    ClientMatch Calculating Interval: 3 seconds

    ClientMatch Neighbor Matching: 60 %

    ClientMatch Threshold: 5

    Spectrum Load Balancing Mode: Channel + Radio

    Min Transmit Power: 18

    Max Transmit Power: Max

    Client Aware: On

    Scanning: On

    Legacy Only: Off

    802.11d / 802.11h: On

    Beacon Interval: 100 ms

    Interference Immunity Level: 2

    Channel Switch Announcement Count: 0

    Background Spectrum Monitoring: Off

    Customize ARM Power Range: Off

    Very High Throughput: On



  • 2.  RE: Optimal RF configuration IAP-335
    Best Answer

    EMPLOYEE
    Posted Mar 20, 2018 10:55 PM

    Hard to give advice without understanding a bit more about the RF environment.


    Are there any issues or concerns with the wireless access?

     

    Take a look at the following for some recommendations/best practices.

     

    http://community.arubanetworks.com/t5/Validated-Reference-Design/Aruba-802-11ac-Networks/ta-p/242637

     

    It's for Controller based networks but still applicable to the IAP.