Hello everyone,I'm new in Aruba (come from Cisco).. and I need some help please.Scenario:Fortigate on one side, Aruba 3810M (WC.16.10) on the other.I'd like to configure a transport VLAN between them and enable OSPF.Only the 3810 is under my administration.So in Cisco world, I'd go this way...router ospf 1router-id 10.28.15.243area 1 authentication message-digestredistribute connected subnetsredistribute static metric 1000 metric-type 1 subnetspassive-interface defaultno passive-interface Vlan700network 10.28.8.0 0.0.7.255 area 1interface vlan 700description L3-VLAN-700ip address 10.28.15.130 255.255.255.248ip ospf message-digest-key 1 md5 0 [key]ip ospf network point-to-pointip ospf cost 10no shutdowninterface GigabitEthernet1/0/1description wan-01switchport access vlan 700switchport mode accessI'm working in a document here, not the switch itself. The 3810 is in production, so I'm planning on having everything prepared and then just paste the config during migration day.I'm struggling with the configuration in the 3810.. this is what I'd like to do.
OSPF configuration for the 3810:ip routing enable!router ospf 0 area backbone enable redistribute connectedexit!!ip router id [ip address lo0]!!vlan 700 tagged 1/1 name L3-VLAN-700 ip address 172.20.30.1 255.255.255.252 à Fortigate .2 ip ospf area 0!!interface 1/1 name [name] tagged vlan 700!!I don't know if the above config is correct/complete.. also, I don't know if I have to add the OSPF statements in all my SVIs, like this...vlan 110 tagged 1/1 name SRV-VLAN ip address 172.20.3.1 255.255.255.0 ip ospf 172.20.3.1 area 0!!vlan 200 tagged 1/1 name CORP-VLAN ip address 172.20.30.1 255.255.248.0 ip helper-address 172.20.3.175 ip helper-address 172.20.3.205 ip ospf area 0Would the above be the equivalent to the "network" statement in the OSPF config for Cisco?I'd really appreciate any input!!!Parnassus, if you read this.. please help me, I've read many of your answers since I moved to HP, you are a genius man!!Thank you in advance!
ip router-id <ip-address>
ip address 172.20.30.1 255.255.255.252
ip ospf 172.20.30.1 area backbone
ip ospf 172.20.30.1 network-type point-to-point
ip router-id <ip-address>ip routing!router ospf area backbone redistribute connected enable exit!vlan 700 name "L3-VLAN-700" tagged 1/1 ip address 172.20.30.1 255.255.255.252 ip ospf 172.20.30.1 area backbone ip ospf 172.20.30.1 network-type point-to-point exit
ip ospf area backbone
ip ospf area 0
ip ospf area 0.0.0.0
If you don't want OSPF Hello's out the various interfaces then use 'ip ospf passive' on those VLANs.
vlan 220 ip ospf area backboneorvlan 220 ip ospf area 0or vlan 220 ip ospf area 0.0.0.0
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.