Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

POE on Cisco 3750 - Possible Suggestions?

This thread has been viewed 1 times

  • 1.  POE on Cisco 3750 - Possible Suggestions?

    Posted May 31, 2017 11:51 AM

    Hey there

     I have an Aruba 225 AP and trying to do a port-channel for this device. The Cisco 3750 does not have poe+ in order to run 30w of power (the limit is 15w). Any suggestions to get both links to work? besides replacing the switches in that network closet. Thanks :)



  • 2.  RE: POE on Cisco 3750 - Possible Suggestions?

    Posted May 31, 2017 01:21 PM

    run a "show power inline"



  • 3.  RE: POE on Cisco 3750 - Possible Suggestions?

    Posted Jun 09, 2017 12:54 PM

    You should be able to use a PoE injector on the ENET 0 port of the AP. Only one port provides power to the AP at a time. Make sure the PoE injector is 802.3at capable.