Security

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

How is your device set up under Devices? Have you tried to toggle between Aruba or HPE?



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Jun 18, 2022 04:51 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

Yes, tried both.
Original Message:
Sent: Jun 21, 2022 04:19 PM
From: Dustin Burns
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

How is your device set up under Devices? Have you tried to toggle between Aruba or HPE?



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Jun 18, 2022 04:51 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

in Cisco switch, termination action value is set to 1 to be able to do reauthentication.

maybe you can try this ?

Original Message:
Sent: Jun 18, 2022 04:51 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

As the Aruba documentation says this value 12 means the time between the port is shutdown and enabled.
You need to set a value between 1-59. 

I tried 1 and 59.
Original Message:
Sent: Jun 21, 2022 10:10 PM
From: BERNHARD HUSTOMO
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

in Cisco switch, termination action value is set to 1 to be able to do reauthentication.

maybe you can try this ?

Original Message:
Sent: Jun 18, 2022 04:51 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

Heres a little update:

While configuring the port bounce in the policy its working fine. 

The port bounce is not triggered from the service CoA.
Original Message:
Sent: Jun 22, 2022 02:43 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

As the Aruba documentation says this value 12 means the time between the port is shutdown and enabled.
You need to set a value between 1-59. 

I tried 1 and 59.
Original Message:
Sent: Jun 21, 2022 10:10 PM
From: BERNHARD HUSTOMO
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

in Cisco switch, termination action value is set to 1 to be able to do reauthentication.

maybe you can try this ?

Original Message:
Sent: Jun 18, 2022 04:51 AM
From: Dennis Werz
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

Make sure switch type is HPE for starters
A

Sent from my iPhone


Original Message:
Sent: 6/18/2022 4:52:00 AM
From: Swagsy
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy

Original Message:
Sent: 6/22/2022 3:55:00 AM
From: alexs-nd
Subject: RE: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Make sure switch type is HPE for starters
A

Sent from my iPhone


Original Message:
Sent: 6/18/2022 4:52:00 AM
From: Swagsy
Subject: Policy Profile RADIUS: Port Bounce not working Aruba 2530

Hello everyone,

I have configured clearpass in the last few days and it works exactly as described.
The policy for the mac authentication which sets the vlan to 180 works.

I still need a port bounce for re-authentication.
Radius: HPE / HPE-port-bounce-host = 12

Unfortunately nothing happens at the switch except that the vlan is set.




Thanks everyone 

-Swagsy