Wired Intelligent Edge

 View Only
last person joined: an hour ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Expand all | Collapse all

port-channel lacp fallback on HP Procurve

This thread has been viewed 0 times
  • 1.  port-channel lacp fallback on HP Procurve

    Posted Aug 08, 2018 08:08 AM

    Hello All. Is there such option on HP Procurve swithes? I need it for PXE booting to work

    Thanks in advance


    #Trunk


  • 2.  RE: port-channel lacp fallback on HP Procurve

    Posted Aug 09, 2018 04:22 AM

    Hello

    You can use following command in the switch:

    Here you create a port-channel with port 1/1 and 1/2, you name it trk1 and you enable lacp.

    trunk 1/1,1/2 trk1 lacp

    If you want to allow vlans on this port-channel, you can't use these ports anymore, but you will need to use trk1, for example.

    vlan 10
    tagged trk1

     



  • 3.  RE: port-channel lacp fallback on HP Procurve

    Posted Aug 09, 2018 04:32 AM

    Hello, thank you for answer, but i mean i need this interfaces as trunk, and trunk does work, but at first one of this interfaces should work as standalone link for PXE boot (PXE can't use trunk) and when system is booted and lacpbdu is in operation again, trunk should be up again. Other vendors have for example this command port-channel lacp fallback to work for this behavior.

    So if interface doesn't receive lacpbdu it should not block the port, but works as standalone interface.