Network Management

 View Only
last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Problem with adding a switch to HP IMC

This thread has been viewed 10 times

  • 1.  Problem with adding a switch to HP IMC

    Posted Apr 12, 2023 08:26 AM

    Hello everyone! I have a freshly installed iMC PLAT 7.3 environment (E0708P02). As I am starting my adventure with this software, I scanned the IP addresses of the switches that I have at my workplace. All switches 2530, 5406, 2540 showed up without a problem. Unfortunately, I have a problem with the switch 2930F model JL253A. Despite trying to manually add it to the list of switches, it appears as a desktop with no configuration options. Can you please advise where is the error? I am attaching a screenshot. Regards



  • 2.  RE: Problem with adding a switch to HP IMC

    Posted Apr 21, 2023 02:00 AM

    Check if SNMP parameters are correct. iMC identify device type with SNMP queries.


    Original Message