Comware

 View Only
last person joined: 2 days ago 

Back to discussions
Expand all | Collapse all

Problem with Configuration VRRP, load-sharing and OSPF

This thread has been viewed 0 times

  • 1.  Problem with Configuration VRRP, load-sharing and OSPF

    Posted Jul 30, 2019 09:00 AM

    Hi,

    For my WAN connection, I have 2 routers 6200 (J8992A)  , with a gigabit/s WAN connection for each router , both routers learn by OSPF area 249 routes from others router(from the others site). I want to you use the full capacity of my 2 Wan connections. From the LAN site the router are configured in VRRP. the router master VRRP have all the trafic to the WAN, How i can do to share the traffic between both router's Wan connections with OSPF? How can I the cost for a route learn from 2 routers with a number of hop different?

    Regards,

    Samuel.

    My configuration (with this configuration the load-sharing is not runnig even if i try to modify the ospf cost to have a similar cost between area 0 and area 249):

    Config router A ( Master VRRP)

    ip routing
    ip load-sharing
    router ospf
    area 0.0.0.249
    area backbone
    metric-type type1
    redistribute static route-map "RESIDISTRIBUTE-LAN"
    enable
    exit
    router vrrp
    ipv4 enable
    exit

    vlan 248
    name "Back-To-Back routeurs WAN"
    tagged Trk1
    ip address 10.1.248.2 255.255.255.252
    ip ospf 10.1.248.2 area backbone
    exit

    vlan 249
    name "WAN connecion"
    tagged 1
    ip address 10.249.254.12 255.255.255.0
    ip ospf 10.249.254.12 area 0.0.0.249

    vlan 250
    name "LAN Connection"
    untagged 2
    ip address 10.1.250.254 255.255.255.0
    vrrp vrid 250
    virtual-ip-address 10.1.250.254
    priority 255
    exit
    exit

     

    Config router B ( Backup VRRP)

    ip routing
    no ip load-sharing
    router ospf
    area 0.0.0.249
    area backbone
    metric-type type1
    redistribute static route-map "RESIDISTRIBUTE-LAN"
    enable
    exit
    router vrrp
    ipv4 enable
    exit

    vlan 248
    name "Back-To-Back routeurs WAN"
    tagged Trk1
    ip address 10.1.248.2 255.255.255.252
    ip ospf 10.1.248.2 area backbone
    exit

    vlan 249
    name "WAN connecion"
    tagged 1
    ip address 10.249.254.12 255.255.255.0
    ip ospf 10.249.254.12 area 0.0.0.249

    vlan 250
    name "LAN Connection"
    untagged 2
    ip address 10.1.250.254 255.255.255.0
    vrrp vrid 250
    virtual-ip-address 10.1.250.254
    priority 255
    exit
    exit
    vlan 250
    name "VLAN250"
    untagged 2
    ip address 10.1.250.253 255.255.255.0
    vrrp vrid 250
    virtual-ip-address 10.1.250.254
    exit
    exit

     

     

     


    #VRRP
    #Load-sharing
    #ospf


  • 2.  RE: Problem with Configuration VRRP, load-sharing and OSPF

    EMPLOYEE