Wireless Access

 View Only
last person joined: 8 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Problem with Guest Wifi setting

This thread has been viewed 16 times

  • 1.  Problem with Guest Wifi setting

    Posted Mar 08, 2023 10:08 PM
    I want to create a guest wifi for visitor who unable to connect internal network, but able to access internet.
    192.168.254.1 is DHCP and DNS server. Phone connects to guest wifi is unable to get IP. Anything wrong with access rules setting?
    IP is assigned if access rules set to allow any to all destination.


  • 2.  RE: Problem with Guest Wifi setting

    EMPLOYEE
    Posted Mar 09, 2023 05:53 AM

    Think that you would need Allow any any at the end of your lists to allow everything else.

    Also the initial DHCP request goes to 255.255.255.255 (broadcast), which in your list is not allowed.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: Problem with Guest Wifi setting

    Posted Mar 09, 2023 08:43 PM

    It works. I leave photo here for reference.

    Both ways below are work.

    Visitors are able to get ips from dhcp server, unable to access intranet, able to access internet.


    Original Message