I have an ssid with 802.1x active and it requests username and password, which must be the AD user
Through the CPPM I establish that when a user connects, it validates which department they are in and, depending on the department, assigns a ROLE. In my Virtual controller, I have defined that it assigns a VLAN according to the ROLE.
The problem is that I see that the CPPM does send the correct instruction but in the VC it assigns me the default user.
I share enforcement capture
I share my Wi-Fi network configuration with 802.1x
Two things to have a look at:
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.