Wired Intelligent Edge

 View Only
last person joined: 22 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ProCurve 2524 Switch

This thread has been viewed 1 times

  • 1.  ProCurve 2524 Switch

    Posted Dec 06, 2001 05:43 PM
    I have a ProCurve 2524 switch, and running TopTools 5.5 on Windows 2000 Server.

    Every so often I get a dropped connection on a few ports. The connection will not reconnect unless I reset the switch. It is always the same four ports that drop.

    Any Ideas? Thanks!


    #toptools


  • 2.  RE: ProCurve 2524 Switch

    Posted Dec 07, 2001 07:45 PM
    Check drivers for your nic on the server. If these are the latest i suggest a switch replacement. It has a lifetime first user waranty !

    Dries


  • 3.  RE: ProCurve 2524 Switch

    Posted Dec 11, 2001 06:35 PM
    Hi,

    1)do the errors follow cabling? Change the cabling of the 4ports in order to be sure that the problem is switch-based when the errors remain on the 4ports.
    2)Check switch internal eventlogs
    3)Are there specific switch settings on these ports like mac-security or stp?
    3)Check Switch Firmware for newer version
    hth
    robert


  • 4.  RE: ProCurve 2524 Switch

    Posted Dec 13, 2001 09:20 AM
    Hello Carl,

    New software was released for the switch on 11/1 - version F.02.13. That may or may not resolve your problem depending on the sw version your currently running.

    http://www.hp.com/cposupport/networking/software/j4812213.exe.html

    Give that a try. If you continue to have problems, you might need to put a sniffer or analyzer on the network to capture what is going on.

    Best regards,
    Jamie Hughes