Wired Intelligent Edge

 View Only

QoS for VoIP Cisco Phones in HPE ProCurve

This thread has been viewed 0 times
  • 1.  QoS for VoIP Cisco Phones in HPE ProCurve

    Posted Aug 01, 2016 03:34 AM

    Hi all,

    I have a requirement to configure QoS on Procurve 2524 and 1920 Switches für VoIP. On Edge Ports there are Cisco IP Phones connected. On each IP Phone Switche there is on PC Connected

    I need to make sure that voice data and signalling traffic is keeps it marking while data traffic should be the default value of zero for cos. 

    Further more we need to make sure that voice traffic (dscp ef and signalling cs3) should be prefered on the LAN. 

    Any comments or good documents? 

    Thanks 

    Udo 


    #DSCP
    #Voice
    #VoIP
    #QOS
    #signalling