Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

QoS on Aruba Controller

This thread has been viewed 3 times

  • 1.  QoS on Aruba Controller

    Posted Jul 13, 2018 05:52 AM

    Hi Experts,

     

    Our customer has a requirement on partitioning the backhaul bandwidth (the untrusted internetline) according to the SSID's(Virtual AP's). Assuming the backhaul line is 200 Mbps and that we have 3 SSID's, the allocation could be 40 %, 30 % and 30 % respectively. The backhaul partitioning requirement is 80 Mbps, 60 Mbps and 60 Mbps respectively for the 200 Mbps line. SSID 1 is supposed to use 80 Mbps, SSID 2 is supposed to use 60 Mbps and SSID3 is supposed to use 60 Mbps. 

     

    I understand there are traffic management profiles and the 3 parameters which control the QoS are Station Shaping Policy,Proportional BW Allocation and Report Interval. 

     

    Can I check if these parameters control the QoS in the air interface (wireless link) only or do these parameters consider the backhaul congestion also ? I am not sure if the parameters can achieve the backhaul partitioning requirement from the customer. Please advise. 

     

    Thanks 

     

    Regards

    Ashwin

     



  • 2.  RE: QoS on Aruba Controller

    EMPLOYEE
    Posted Aug 12, 2018 01:43 AM

    The traffic management profiles only deal with traffic in the air.