When replacing a VSX switch member that is configured and managed through Aruba Central, ensure that the new replacement switch is assigned to the same group as the old switch. If the assigned group is the template group, ensure that the variables for the new replacement switch are same as the old switch. In the case of the UI group, if the VSX switch is configured using MultiEdit, you need to copy the original configuration from the MultiEdit configuration editor and paste it to the new replacement switch after moving it into the group.https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/get-started/quick-start-switch-cx.htm
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.