Thanks for your reply.
Our organisation is separated in two different locations. Each location with a firewall and established a link network between. This linknett is 172.31.255.0/28.
Location 1 has a new server nettwork in 10.20.20.x/22 and old server network in 10.10.128.0/22
Location 2 has a new server network in 10.30.20.x/22 and old server network in 10.10.0.0/16
Since either location 1 or 2 has interferring networks in the new ranges they routes between the firewalls over the link network.
The problem is that we need to trust domain controllers from location 2 new network domain controller 10.30.20.10 against location 1 old network domain controller 10.10.129.40 over the linknetwork.
I have defined the route on location 2 firewall and it routes the rquest to location 1 10.10.128.40 network.
The problem is that i am pretty new to HP5820 and need help solving how to get my request from location 2 servernetwork 10.30.20.0/22 to go through 5820 and to the firewall.
My default route in 5820 is 0.0.0.0 0.0.0.0 to my firewall ip.
I got VLAN10 with interface 10.10.1.1/16, so that will create a direct route in 5820.
How am i to get my request from location 2 10.30.20.0/22 to 10.10.128.0/22 to go from HP5820 and to my firewall?
Really hope for some help on solving this.
#switch#firewall#5820#route#HP5800#5800#HP5820