Wired Intelligent Edge

 View Only
last person joined: 19 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Back to discussions
Expand all | Collapse all

Rx error (oversize) on AP switch ports ARUBA CX

This thread has been viewed 20 times

  • 1.  Rx error (oversize) on AP switch ports ARUBA CX

    Posted Jun 30, 2022 09:08 AM
    Hello team,
    At one of our client side ,we are getting tx (oversize) error on AP ports. I have changed the MTU size to 9198 on access switch interface and on core switch i have done ip MTU 9198 on interface vlan .But still after sometime I am getting same error on every AP switch ports.
    I will be very grateful if someone can help me with this issue.

    Thanks,


  • 2.  RE: Rx error (oversize) on AP switch ports ARUBA CX

    EMPLOYEE
    Posted Aug 03, 2022 09:28 AM
    In order to assure jumbo frame can be used you need to implement it end-to-end including controller/gateway, uplink ports etc. Also firewall on the controller should accept jumbo frames.
    Original Message


  • 3.  RE: Rx error (oversize) on AP switch ports ARUBA CX

    EMPLOYEE
    Posted Aug 09, 2022 06:51 AM

    Hello Shivam,

    have you tried to play with the MTU on the AP side (if the problem still persist of course)? 

    https://community.arubanetworks.com/blogs/esupport1/2020/05/11/giant-packets-on-switch-port-connected-to-access-point


    Original Message