Comware

 View Only
last person joined: 2 days ago 

Back to discussions
Expand all | Collapse all

S5120 policy based routing / multiple next hop

This thread has been viewed 0 times

  • 1.  S5120 policy based routing / multiple next hop

    Posted May 10, 2016 03:25 AM

    Hi everybody.

    I'm running a 2 units HP/H3C S5120 stack with IRF Link.
    Firmware version is
    Comware Software, Version 5.20, Release 2221P02
    Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
    H3C S5120-28C-EI uptime is 5 weeks, 0 day, 15 hours, 26 minutes

    H3C S5120-28C-EI with 1 Processor
    128M    bytes SDRAM
    16384K  bytes Flash Memory

    Hardware Version is REV.B
    CPLD Version is 007
    Bootrom Version is 621
    [SubSlot 0] 24GE+4SFP Hardware Version is REV.B
    [SubSlot 1] 2 CX4 Hardware Version is REV.A

    I would know if my system will support policy based routing or not.
    My config has different vlan interfaces with their own IP address and I was trying to configure different gateways (next-hop) based on source vlan.

    Thanks!
    Nick


    #pbr
    #5120


  • 2.  RE: S5120 policy based routing / multiple next hop

    Posted Jul 08, 2016 09:22 AM

    Its been awhile since you posted but I though I'd answer what I could

    See below an online howto for your comware version Version 5.2 doing PBR, it's only slightly different to what we do with our Compware 7 DD switches

    Policy Based Routing for HP Comware (version 5.2)

    Regards, Daniel