Wireless Access

 View Only
last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

Set up 3 AP 225 IAP 225 RW

This thread has been viewed 8 times
  • 1.  Set up 3 AP 225 IAP 225 RW

    Posted 19 days ago

    I have 3 x IAP 225 RW

    i want to set them up so that

    1 is the Master and the others are Slaves

    All have the Same SSID on 2.4 and 5 Ghz

    to cover our house where the Walls have insulation installed that has an Aluminium sheet on one side

    This is blocking any RF passing through

    AP are already mounted running POE + 51x @ 1.1amps to each AP

    any guidance to chieve seamless Wifi would be appreciated

    TVs and other small devices to use 2.4 and phones / tablets to use 5Ghz

    Thanks in advance

  • 2.  RE: Set up 3 AP 225 IAP 225 RW

    Posted 13 days ago

    Please have a look at these videos on how to set this up.

    Depending on the attenuation of the walls and AP positioning/coverage, you may have a poor roaming experience between the rooms. But if that's not a requirement (example for voice), it should work much better than a single AP or multiple standalone APs.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.