For sflow, you can try to use template based configuration and see if it works.
For port mirroring, teh approach that one can take is to use "aruba-central support-mode enable"
Ac2930F-24G(config)# aruba-central support-mode enable
This mode will enable all CLI configuration commands, including those
normally reserved by the Aruba Central service. Use of this mode may
invalidate the configuration provisioned through Aruba Central server.
Continue (y/n)? y
Ac2930F-24G(config)#
From here the config changes that does not overlap with the Central GUI features will be retained.
Note that if the switch gets replaced, these port mirror configs won't be in the backup configs, you you need to reapply them.
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------
Original Message:
Sent: Jan 02, 2023 03:36 AM
From: Gerardo Mejia
Subject: SFLOW or Port Mirroring
Hello People,
is there a way to configured SFLOW or PORT MIRROTING on ARUBA2930f-48g that being managed via Aruba Central i havent foud a way to doit.
thanks for the help by the way.
Hola gente,
Existe una manera de configurar SFLOW o PORT MIRROTING atravez de Aruba central no he encontrado la manera.
gracias por la ayuda.