Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

show ap associations on Mobility Conductor

This thread has been viewed 20 times
  • 1.  show ap associations on Mobility Conductor

    Posted Nov 19, 2023 08:53 PM

    Hi, does the "show ap associations" command actually work for Mobility Conductors (formerly Master)? We're getting back empty association tables but this command works on the managed Controllers themselves. If not, is there an alternative command we can run on the Conductors to see all associations for managed Controllers?

  • 2.  RE: show ap associations on Mobility Conductor
    Best Answer

    Posted Nov 20, 2023 03:59 AM

    You can issue the show global-user-table command.

    Since the Mobilty Conductor has no APs connected - those are connected to the Cluster Controllers - this command cannot be issued here.


    You can jump from Mobility Conductor direct to the Controller by issuing the mdconnect command. With that you don´t have to open a dedicated SSH Session. And here you can set direct CLI Command to that MD.


    This is what you learn on dedicated Aruba course. I would suggest to visit one.

  • 3.  RE: show ap associations on Mobility Conductor

    Posted Nov 20, 2023 09:37 AM

    Thank you so much! This is exactly the information we needed