Only active routes are shown in 'show ip route'. Could it be that the VLAN on which you have your default gateway is down, or there is no active IP on the switch to get to the default gateway?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Apr 03, 2024 01:19 PM
From: Capbuster
Subject: show ip route NOT showing static routes
Before I create a ticket I thought I would ask here.
New to the Aruba switches, upgrading from OLD ZL switch(es)
Deploying new 6300 switches
Everything has gone fine in the new deployment until now... near the end.
Creating a static route for Internet traffic.... standard 0.0.0.0
The system takes the command fine.
But if I then try to verify with 'show ip route' it only lists the vlans
To diagnose I then ran a 'show running-config', and they are right there.
The same commands on the old 8212ZL show them fine.
What am I missing ?