Comware

Hi everybody,

I'm new to the HP environment, I always worked with Cisco. Now there's been a fusion between different areas in my company and we have to manage Cisco and HP devices. I was wondering if there was any VM I could install or something like that in order to simulate the behaviour, learn and test devices compatibility with GNS3 for example.

Does HP provide something like that? a router VM for example? We have the following devices in our network:

HPE Comware Software, Version 7.1.054, Release 7103P12
Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
HPE HSR6602-XG uptime is 15 weeks, 4 days, 7 hours, 10 minutes
Last reboot reason : Power on
Boot image: flash:/HSR6602-CMW710-BOOT-R7103P12.bin
Boot image version: 7.1.054, Release 7103P12
  Compiled Dec 06 2016 16:00:01
System image: flash:/HSR6602-CMW710-SYSTEM-R7103P12.bin
System image version: 7.1.054, Release 7103P12
  Compiled Dec 06 2016 16:00:01
Feature image(s) list:
  flash:/HSR6602-CMW710-DEVKIT-R7103P12.bin, version: 7.1.054
    Compiled Dec 06 2016 16:00:01

Slot 0: HSR6602-XG uptime is 15 weeks, 4 days, 7 hours, 10 minutes
 CPU type: FREESCALE P4080 1500MHz
 4096M bytes DDR3 SDRAM Memory
 8M bytes Flash Memory
 128K bytes NVRAM
 PCB              Version: Ver.A
 Basic      Logic Version: 1.0
 Extend     Logic Version: 2.0
 Basic   BootWare Version: 2.04
 Extend  BootWare Version: 2.04
 [FIXED PORTS] MGE              (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0
 [FIXED PORTS] Combo 4GE        (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0
 [FIXED PORTS] 2XGE             (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0

Slot 1: FIP-20 uptime is 15 weeks, 4 days, 7 hours, 10 minutes
 PCB              Version: Ver.A
 Logic            Version: 1.0
 Basic   BootWare Version: 0.00
 Extend  BootWare Version: 0.00
 [SUBSLOT   1] RT-HIM-2EXP      (Hardware)Ver.A,   (Driver)1.0,   (Cpld)1.0
 [SUBSLOT   2] The SubCard is not present

I've already downloaded and read some of the troubleshooting and configuration guides for Comware v7 but I would to test it in a lab.

Thanks in advance!

Regards,

Luis

Hi Lucho,

For Comware switches, There is a HCL (H3C Cloud Simulator)  Its a drag and drop application which can simulate Comware 7. The HP Comware Lab, is a graphical user interface for the network device emulation software. With the HP Comware Lab, the user can virtualize various models of the HP network equipment and configurations to build a virtual network environment.

You can download the application from  here  :- https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7107839&swItemId=nw_148568-1&swEnvOid=4184

I found a document which as information on how to integrate HCL with GNS3 . Hope this helps

https://community.arubanetworks.com/aruba/attachments/aruba/DataCenter/16/1/Integrating%20the%20HP%20Network%20Simulator%20with%20GNS3%20v.0.5.docx

if I've helped, please give kudos

Thanks,

tools of year 2015 and addons more old, umm is your time

si compraste dispositivos hpe, lo siento no hay nada de ello hay una tool hcl pero es super antigua y tira un lios echarla a andar.

Puedes descargar la última versión del laboratorio de la página de H3C; la última versión del software es del 2017 y si funciona perfectamente.

Acá puedes descargarlo (toda la pág está en chino pero puedes utilizar el traductor y descargarlo e instalarlo en inglés sin problemas)

http://www.h3c.com/cn/d_201410/842486_30005_0.htm