Network Management

 View Only
last person joined: 20 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

SNMP traps Aruba CX and IMC

This thread has been viewed 42 times

  • 1.  SNMP traps Aruba CX and IMC

    Posted Jun 08, 2021 03:21 AM
    Hello,

    We have 2 Aruba CX 6400 running 10.05.0070 and IMC 7.3 and I was able to succesfully add the 2 devices in IMC with SNMPv3 but for some reason the traps are not coming in IMC only poll alerts ...
    I configured this on the CX switches

    snmp-server vrf mgmt
    snmp-server system-description xxx
    snmp-server system-location yyy
    snmp-server system-contact zzz
    snmp-server community 1234
    snmpv3 security-level auth
    snmpv3 user xxx auth sha auth-pass ciphertext xxx priv aes priv-pass ciphertext xxx 
    snmp-server host A.B.C.D trap version v2c community 1234
    snmp-server host A.B.C.D trap version v2c community 1234 vrf mgmt
    snmp-server host A.B.C.D trap version v3 user xxx vrf mgmt
    snmpv3 context xxx vrf mgmt community 1234

    So did I overlook something ??

    ------------------------------
    Peter Van Rietvelde
    ------------------------------


  • 2.  RE: SNMP traps Aruba CX and IMC

    Posted Jun 17, 2021 02:32 AM
    since nobody has the answer I contacted HPe/Aruba and apparently this is only supported form Firmware 10.7 (snmp traps) ...

    ------------------------------
    Peter Van Rietvelde
    ------------------------------

    Original Message