Glad to hear that it is working. Have a good day!
Original Message:
Sent: Apr 08, 2024 08:47 PM
From: sfpit1202
Subject: SNMPv3 on AOS-CX User is disabled
I changed it to aes from des, I think that was my mistake, it all is working now, thank you!
Original Message:
Sent: Mar 22, 2024 06:02 AM
From: parnassus
Subject: SNMPv3 on AOS-CX User is disabled
Hi! something like:
snmp-server vrf mgmt
snmp-server system-description <system-description>
snmp-server system-location <system-location>
snmp-server system-contact <system-contact>
snmpv3 user <snmpv3-user> auth sha auth-pass ciphertext <....> priv aes priv-pass ciphertext <....>
snmp-server host <nms-host> inform version v3 user <snmpv3-user>
snmp-server host <nms-host> trap version v3 user <snmpv3-user>
Original Message:
Sent: Mar 21, 2024 07:50 PM
From: sfpit1202
Subject: SNMPv3 on AOS-CX User is disabled
I am trying to configure SNMPv3 on my CX switches. This is the config I am using:
snmp-server vrf mgmt
snmp-server system-contact CONTACT_INFO
snmp-server system-location LOCATION
snmp-server system-description DESCRIPTION
snmpv3 user USER_NAME auth sha auth-pass plaintext 123456 priv des priv-pass plaintext 123456
snmpv3 user USER_NAME context CONTEXT_NAME
snmp-server host IP_ADDRESS trap version v3 user USER_NAME vrf mgmt
snmpv3 context CONTEXT_NAME vrf mgmt community public
snmpv3 security-level auth-privacy
snmpv3 user USER_NAME access-level rw
When I get done I get the following message:
"This SNMPv3 user will be disabled due to non-conformance with current SNMPv3 security level configured"
I am not sure if I am using the wrong access or security level or if there is something else I am missing...