Wireless Access

 View Only
last person joined: 12 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

SSID on different Controller

This thread has been viewed 9 times
  • 1.  SSID on different Controller

    Posted May 18, 2022 08:31 AM
    Hey guys,

    we have one cluster on site A and one controller on site B. APs on site B broadcasts some SSIDs. Site A is connected with Site B via Site-to-Site VPN.
    How is it possible to use a SSID from site A on site B?

    I instantly had Multizone in mind but unfortunately this won't work in our environment because all controllers are managed by the same Conductor but in different hierarchy branches.

    Another approach was to create a WLAN on site B, where the LMS is the Cluster of Site A. But I did not test this yet.

    Does anyone have a clue to approach this?
    Is multizoning the only way to go?


  • 2.  RE: SSID on different Controller

    EMPLOYEE
    Posted May 18, 2022 09:06 AM
    Layer 2 GRE tunnel between the controllers at site A to Site B.  Assign  VLAN to GRE tunnel.  Configure the SSID to put users on that VLAN.

    This thread describes what could be done:  https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=28036

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------