Wired Intelligent Edge

 View Only
last person joined: 23 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Stacking 3rd switch fails

This thread has been viewed 3 times

  • 1.  Stacking 3rd switch fails

    Posted 22 hours ago

    Trying to add 3rd CX6300 switch to stack. As soon as I run

    vsf member 1

    link 1 1/1/25

    link 2 1/1/26

    exit

    vsf renumber-to 3

    The 3rd switch has problems errors booting

    Created symlink /etc/systemd/system/bannerd.service -> /dev/null.

    Warning: The unit file, source configuration file or drop-ins of bannerd.service changed on disk. Run 'systemctl daemon-reload' to reload units.

    The STK and health lights are flashing amber.



  • 2.  RE: Stacking 3rd switch fails

    Posted 7 hours ago

    The easiest way I have found to add a new switch to a stack is to plug in from the previous,  so as your doing 26 from second switch to 25 of 3rd, then factory reset the 3rd on an erase all zeroize.  

    The auto stack works great, and the zeroize just makes sure everything starts out fresh.  I have never had an when I have added switches this way.


    Original Message