Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

SU 2930 - ERROR: SRAM BIST Failed

This thread has been viewed 1 times

  • 1.  SU 2930 - ERROR: SRAM BIST Failed

    Posted Mar 30, 2021 04:36 AM

    Hello, i am new in this forum and would like to get an answer to a note from the serial port of a SU 2930M 24G PoE

    The Switch is out of order and i tried too get the config file of this server.

    I01
    0x80200000 0x00006000 0x00000000 0x00000000
    ERROR: SRAM BIST Failed

    The SRAM BIST is the memory check, or? How can i prefend the Switch to check the memory?

    Thank you for your support.

    Kind regards Alexander


    #2930
    #BIST
    #config
    #SRAM


  • 2.  RE: SU 2930 - ERROR: SRAM BIST Failed

    EMPLOYEE
    Posted Mar 30, 2021 09:10 AM

    Hello,

    It seems switch memoy has been failed.

    Its difficult to get the config file now.

    I believe you need to replace the switch.

    Thanks!



  • 3.  RE: SU 2930 - ERROR: SRAM BIST Failed

    MVP GURU
    Posted Mar 31, 2021 04:15 AM

    Hi  @alha_support BIST is the Built-In-Self-Test internal and automatic procedure to test the switch Hardware running at boot, in this case your switch didn't pass the SRAM test...I'm with @akg7 , you should ask for an RMA if you're entitled to do so.