Hi,
I have a bit of a dilemma, and not sure why it's happening. I have created a new vlan on an access switch(Procurve), that is connected to a core switch that is connected to a firewall. When I connected a system(server) to a port and assign it the new vlan on the access switch, the system can't seem to ping any thing, even the firewall. Checking the switch to show the mac address of that port, show me nothing.
MAC Address VLANs
------------- ------------
The system is using the firewall as it's gateway. The vlan is configured no differnt then the other vlans, with the following,
vlan 34
name "Server34"
untagged 19, 21
tagged Trunk2
no ip address
exit
I have a trunk that connects to core switch,
trunk 30-31 Trunk2 trunk
There are no routes on the access switch, and I'm just not clear Why this VLAN is failing to ping when other vlans with the same config are working fine. Any help would be appreciated, as I'm just not seeing what is missing.
Thanks
#VLAN#Network#switch