I have an Aruba Instant AP setup.
I setup three SSIDs, one for each vlan: Internal(vlan 1), DMZ(vlan 3) and Guest(vlan 7).
The aruba is connected to a switch. Connected to a trunk port. It has vlan 3 Untagged and vlans 1 and 7 Tagged.
On the Aruba. I have the DMZ(3) set to the default vlan and it connects to the internet, but the Internal(1) and Guest(7) do not.
I created a DHCP scope for vlan 1 and vlan 7 and they do pull the correct IP addresses.
Are there any settings I'm missing?