Comware

 View Only
last person joined: yesterday 

Expand all | Collapse all

Terminal length 0

This thread has been viewed 2 times
  • 1.  Terminal length 0

    Posted Sep 25, 2021 02:15 AM

    Hi everyon 

    When i try is to show log on sw (someone)  I typing #terminal lengt 0 for complete to sh log

    but on hpe how to typing on same this whem i #dis logbuffer re  


    #Commware


  • 2.  RE: Terminal length 0

    EMPLOYEE
    Posted Sep 25, 2021 03:05 AM
    Hello ,

    By default, up to 24 lines can be displayed on a screen. You can change the limit by using the screen-length screen-length command.
    You can also disable pausing between screens of output for the current session. Then, all output is
    displayed at one time and the screen is refreshed continuously until the final screen is displayed.

    Use below command:

    HPE# screen-length disable

    Thanks!


  • 3.  RE: Terminal length 0

    Posted Sep 29, 2021 11:27 PM

    Thank you so mush akg7 &  Ivan_B for good suggesstion



  • 4.  RE: Terminal length 0

    EMPLOYEE
    Posted Sep 25, 2021 06:11 AM

    Hi @Pluang !

    Also, you can make this change permanent by adding 'screen-length 0' to 'line vty ...' settings.

    <Sysname> system-view
    [Sysname] line vty 0
    [Sysname-line-vty0] screen-length 0

    If you have range of vty, use 'line vty 0 <last_vty_number>', so this option to affect all VTY interfaces.