Aruba Airwave

 View Only
last person joined: 2 days ago 

Back to discussions
Expand all | Collapse all

Topology not displaying in AirWave

This thread has been viewed 22 times

  • 1.  Topology not displaying in AirWave

    Posted Dec 15, 2022 02:02 PM
    Topology in AirWave is not displaying anything, does STP have to be enabled for this?


  • 2.  RE: Topology not displaying in AirWave

    Posted Dec 20, 2022 03:35 AM
    Not STP, but LLDP (Industry) or CDP (Cisco); as well as SNMP Polling, but that should be standard with Airwave managing your infrastructure.
    Make sure that you see neighboring devices in your switch/APs. If those are not visible, there is no way that Airwave can make a topolology.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message