I cant get Trill to tunnel traffic between client switches (SW1 and SW4)
SW1 --- 1011 trill access tag ---> SW2 ---- 201 trill trunk tagged ---> SW3 --- 1011 trill access tag ---> SW4
I have a Trill trunk set up between two cswitches, and that seams to work fine....
Now I set up 2 seperate switches also on trill trunks with 'access alone' set on these trunks.
I can't ping from one client switch to the 2nd client switch (SW1 to SW4)
Also intresting I can't 'display mac-address' on any switch.
SW1:
interface Vlan-interface1
ip address 10.101.11.21 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-mode bridge
combo enable fiber
undo lldp tlv-enable dot1-tlv port-vlan-id
SW2:
trill
system-id 0000.0000.0011
nickname 0011
#
vlan 1
#
vlan 201
#
vlan 1011
#
interface Vlan-interface1
ip address 10.0.0.1 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-mode bridge
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 201
combo enable fiber
trill enable
trill designated-vlan 201
trill link-type trunk
#
interface GigabitEthernet1/0/2
port link-mode bridge
combo enable fiber
trill enable
trill link-type trunk
#
interface GigabitEthernet1/0/3
port link-mode bridge
port access vlan 1011
combo enable fiber
undo lldp tlv-enable dot1-tlv port-vlan-id
trill enable
trill link-type access alone
#
SW3:
trill
system-id 0000.0000.0012
nickname 0012
#
vlan 1
#
vlan 201
#
vlan 1011
#
interface Vlan-interface1
ip address 10.0.0.1 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-mode bridge
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 201
combo enable fiber
trill enable
trill designated-vlan 201
trill link-type trunk
#
interface GigabitEthernet1/0/2
port link-mode bridge
combo enable fiber
trill enable
trill link-type trunk
#
interface GigabitEthernet1/0/3
port link-mode bridge
port access vlan 1011
combo enable fiber
undo lldp tlv-enable dot1-tlv port-vlan-id
trill enable
trill link-type access alone
#
SW4:
interface Vlan-interface1
ip address 10.101.11.22 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-mode bridge
combo enable fiber
undo lldp tlv-enable dot1-tlv port-vlan-id
#TRILL