Recently started to use Newrelic to poll switch stack. I can successfully poll stack in my DMZ but stack in other vlan gives error. The switch stack is at 192.168.50.249[root@snmp-monitoringpc ~]# snmpwalk -v 2c -On -c BSS_Monitor 192.168.50.249 .18.104.22.168.22.214.171.124.0
.126.96.36.199.188.8.131.52.0 = No more variables left in this MIB View (It is past the end of the MIB tree)Anyone have an idea what could be issue? I removed all snmp and re-added and I have done everything except upgrade code but since we are SaaS and up 24/7/365, I cannot upgrade.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.