Network Management

 View Only
last person joined: 8 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Unable to restore iMC databases (7.0 E202)

This thread has been viewed 0 times

  • 1.  Unable to restore iMC databases (7.0 E202)

    Posted Oct 21, 2014 10:33 AM

    Following a server failure the OS on my Win 2K8 R2 server has been reinstalled. I have reinstalled iMC and the software runs ok. When I try and restore the old databases however I get an error message stating that DBMAN is running but database restore failed.  The log is even less helpful with just two entries:

    Begin to manual restore databases. manualType:0

    Failed to manual restore databases. manualType:0

     

    I have ensured that all the deployed modules are identical to that deployed at the time of the backup. I have logged in to iMC and reapplied the licence key. I have not recreated anything else.

     

    Any ideas as to how I can get my server back?

     

    Regards,

     

    Zac


    #IMC7.0


  • 2.  RE: Unable to restore iMC databases (7.0 E202)

    Posted Oct 22, 2014 05:04 PM

    Hi,

     

    make sure to make a manual backup of the new installation first.

    This will cause dbman to update the database passwords in the dbman configuration file, at which point the restore should work as well,

     

    Hope this helps,Peter



  • 3.  RE: Unable to restore iMC databases (7.0 E202)

    Posted Oct 23, 2014 04:44 AM

    Many many thanks Peter,

     

    That has solved the problem and saved me much rework!!

     

    Best regards,

     

    Zac