We use a Mobility Master (2 of them for High Availability) and we have 2 x Hardware Local Controllers in a managed network group below the Mobility Master.I need to update an SSL certificate on each local hardware controller because that we are using for guest access and captive portal.The New certificate name is: wlan03.strattec.com22The previously used certificate name is: wlan03.strattec.com20When I SSH to the local controller and execute this command>show web-server profileI see the following results:Switch Certificate wlan03.strattec.com20Captive Portal Certificate wlan03a.strattec.com22When I attempt to change the 'Switch Certificate' information from the SSH, I get the following error:(SSC01NVL016125) *[20:4c:03:57:6f:c2] (config) #web-server profile(SSC01NVL016125) *[20:4c:03:57:6f:c2] (Web Server Configuration) #switch-cert wlan03.strattec.com22Error: server certificate "wlan03.strattec.com20" not found in path /md/SSC03/20:4c:03:57:6f:c2The Aruba is saying that it cannot see the older certificate and as a result it cannot change it to be the new certificate. Perhaps there is another way to change the Switch Certificate settings on this local controller.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.