Comware

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

V1910-48G - LACP on SFP ports not working

This thread has been viewed 0 times

  • 1.  V1910-48G - LACP on SFP ports not working

    Posted Jun 05, 2014 04:54 PM

    Hi guys,

     

    I'm new here so please bare with me :o)

     

    I just got 2 HP V1910 switches and I want to make a LAG (LACP) between them. I brought 4 HP X121 LC SX Transceivers and got som OM3 fiber panels mounted on each site. If I connect 1 cable and make a single connection between the switches everything works like a charm and the switches exchange data with each other.

     

    I've have been trying to make a LACP (dynamic) configuration on the switches to boost the uplink between them but when I type in my last command the CLI just throws an error and I can't get the LAG/Trunk online.

    SW1 already got a LACP dynamic trunk configured just using 2 ethernet ports and they are connected to a Synolygy DS-412+. This configuration works just fine and I have used the commands from the configuration to try and make a configuration on the SFP ports.

     

    See my commands:

     

    interface Bridge-Aggregation 2
    description LACP_link_to_HPSKUNK
    link-aggregation mode dynamic
    quit

     

    interface g1/0/49
    port link-aggregation group 2
    quit

     

    interface g1/0/50
    port link-aggregation group 2
    quit

     

    interface Bridge-Aggregation 2
    port link-type trunk <--- This commands fails and just tells that the configuration couldn't complete (The specific error isn't available right now as the switches are run i production and when I play around with them the link goes down...)

     

    So my questions are:
    Can the V1910 do a LACP Dynamic on the SFP ports?
    Can the V1910 do a LACP Static on the SFP ports?
    Can I in some way make both switches use my 2 fiber connections to boost the uplink between them?

    Should the type of my SFP ports be access instead?

     

    I hope some of you guys can point me in the right direction regarding my issue with the switches.

     

    I've 5 vlans: 1,10,20,30,40. They are working just fine, my networks can communicate with each other and travel across the switches without issues.

     

    The config for both switches comes her:

     

    ###SW1###

    #
    version 5.20, Release 1513P85
    #
    sysname HP-V1910-Skunk
    #
    domain default enable system
    #
    telnet server enable
    #
    ip ttl-expires enable
    #
    password-recovery enable
    #
    vlan 1
    description Management
    #
    vlan 10
    description Server
    #
    vlan 20
    description Client
    #
    vlan 30
    description WIFI
    #
    vlan 40
    description WIFI-GUEST
    #
    domain system
    access-limit disable
    state active
    idle-cut disable
    self-service-url disable
    #
    user-group system
    #
    local-user admin
    authorization-attribute level 3
    service-type ssh telnet terminal
    service-type web
    #
    stp mode rstp
    stp enable
    #
    interface NULL0
    #
    interface Vlan-interface1
    ip address 10.203.5.3 255.255.255.0
    #
    interface GigabitEthernet1/0/1
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/2
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/3
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/4
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/5
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/6
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/7
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/8
    port link-type hybrid
    undo port hybrid vlan 1
    port hybrid vlan 10 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/9
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/10
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/11
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/12
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/13
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/14
    port link-type hybrid
    undo port hybrid vlan 1
    port hybrid vlan 20 untagged
    port hybrid pvid vlan 20
    stp edged-port enable
    #
    interface GigabitEthernet1/0/15
    stp edged-port enable
    #
    interface GigabitEthernet1/0/16
    stp edged-port enable
    #
    interface GigabitEthernet1/0/17
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/18
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/19
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/20
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/21
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/22
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/23
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/24
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/25
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/26
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/27
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/28
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/29
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/30
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/31
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/32
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/33
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/34
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/35
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/36
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/37
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/38
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/39
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/40
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/41
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/42
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/43
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/44
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/45
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/46
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/47
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/48
    port link-type hybrid
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/49
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/50
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/51
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/52
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 10.203.5.2
    #
    snmp-agent
    snmp-agent local-engineid 8000000B03CC3E5FE3F6F2
    snmp-agent sys-info contact motz
    snmp-agent sys-info location skunk
    snmp-agent sys-info version v3
    #
    dhcp enable
    #
    ssh server enable
    #
    user-interface aux 0
    authentication-mode scheme
    user-interface vty 0 15
    authentication-mode scheme
    #
    return


    ###SW2###

    #
    version 5.20, Release 1513P85
    #
    sysname HP
    #
    dhcp relay server-group 1 ip 10.203.10.11
    #
    domain default enable system
    #
    undo ipv6
    #
    telnet server enable
    #
    ip ttl-expires enable
    #
    password-recovery enable
    #
    acl number 3001
    rule 0 deny ip source 10.203.40.0 0 destination 10.203.10.0 0
    #
    vlan 1
    #
    vlan 10
    description Server
    name VLAN_10
    #
    vlan 20
    description Clients
    name VLAN_20
    #
    vlan 30
    description Clients_Wifi
    name VLAN_30
    #
    vlan 40
    description Clients_Wifi
    name VLAN_40
    #
    domain system
    access-limit disable
    state active
    idle-cut disable
    self-service-url disable
    #
    traffic classifier vlan40_2_vlan10 operator and
    if-match acl 3001
    #
    traffic behavior deny_stats_2
    filter deny
    #
    qos policy vlan40_acl_vlan10
    classifier vlan40_2_vlan10 behavior deny_stats_2
    #
    user-group system
    #
    local-user admin
    authorization-attribute level 3
    service-type ssh telnet terminal
    service-type web
    #
    stp mode rstp
    stp enable
    #
    interface Bridge-Aggregation1
    description LACP_link_to_SYNOLOGY
    port link-type trunk
    undo port trunk permit vlan 1
    port trunk permit vlan 10
    port trunk pvid vlan 10
    link-aggregation mode dynamic
    #
    interface NULL0
    #
    interface Vlan-interface1
    ip address 10.203.5.2 255.255.255.0
    #
    interface Vlan-interface10
    ip address 10.203.10.1 255.255.255.0
    dhcp select relay
    dhcp relay server-select 1
    #
    interface Vlan-interface20
    ip address 10.203.20.1 255.255.255.0
    dhcp select relay
    dhcp relay server-select 1
    #
    interface Vlan-interface30
    ip address 10.203.30.1 255.255.255.0
    dhcp select relay
    dhcp relay server-select 1
    #
    interface Vlan-interface40
    ip address 10.203.40.1 255.255.255.0
    dhcp select relay
    dhcp relay server-select 1
    #
    interface GigabitEthernet1/0/1
    stp edged-port enable
    #
    interface GigabitEthernet1/0/2
    stp edged-port enable
    #
    interface GigabitEthernet1/0/3
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/4
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/5
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/6
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/7
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/8
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/9
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/10
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/11
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/12
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/13
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/14
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/15
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/16
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/17
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/18
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/19
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/20
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/21
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/22
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/23
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/24
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/25
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/26
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/27
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/28
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/29
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/30
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/31
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/32
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/33
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/34
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/35
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/36
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/37
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/38
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/39
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/40
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/41
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/42
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/43
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/44
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/45
    port link-type trunk
    undo port trunk permit vlan 1
    port trunk permit vlan 10
    port trunk pvid vlan 10
    stp edged-port enable
    link-aggregation port-priority 100
    port link-aggregation group 1
    #
    interface GigabitEthernet1/0/46
    port link-type trunk
    undo port trunk permit vlan 1
    port trunk permit vlan 10
    port trunk pvid vlan 10
    stp edged-port enable
    link-aggregation port-priority 100
    port link-aggregation group 1
    #
    interface GigabitEthernet1/0/47
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/48
    port access vlan 10
    stp edged-port enable
    #
    interface GigabitEthernet1/0/49
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/50
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/51
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    interface GigabitEthernet1/0/52
    port link-type hybrid
    port hybrid vlan 10 20 30 40 tagged
    port hybrid vlan 1 untagged
    stp edged-port enable
    #
    ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 10.203.5.1
    #
    snmp-agent
    snmp-agent local-engineid 8000000B03CC3E5FE426FA
    snmp-agent sys-info contact motz
    snmp-agent sys-info location serverroom
    snmp-agent sys-info version v3
    #
    dhcp enable
    #
    ssh server enable
    #
    qos vlan-policy vlan40_acl_vlan10 vlan 10 inbound
    #
    user-interface aux 0
    authentication-mode scheme
    user-interface vty 0 15
    authentication-mode scheme
    #
    return

     

     

    P.S. This thread has been moevd from Comware-Based to Web & Unmanaged. - Hp forum moderator


    #v1910
    #LAG
    #fiber
    #LACP
    #SFP


  • 2.  RE: V1910-48G - LACP on SFP ports not working

    Posted Jun 09, 2014 05:31 AM

    Hi guys,

     

    I did solve my problems regarding LACP on the SFP ports. I found some insight from this post: Link

     

    I found out that I already did assign the ports by them self to Hybrid but was trying to make the LACP as a Trunk. The ports and the LACP group has to be the same type if not the LACP group will not come up and the error doesn't give you any clues.

     

    I used the following commands:

     

    interface Bridge-Aggregation 2
    description LACP_link_1
    link-aggregation mode dynamic
    quit

     

    interface g1/0/49
    port link-type access
    port link-type hybrid
    stp edged-port enable
    link-aggregation port-priority 50
    port link-aggregation group 2
    quit

     

    interface g1/0/50
    port link-type access
    port link-type hybrid
    stp edged-port enable
    link-aggregation port-priority 50
    port link-aggregation group 2
    quit


    interface Bridge-Aggregation 2
    port link-type hybrid
    port hybrid vlan 1 untagged
    port hybrid vlan 10 20 30 40 tagged
    port hybrid pvid vlan 1

    quit

     

    Hope that this can help outers out there if they are facing the same problems as I was :o)


    #LAG
    #SFP
    #LACP
    #v1910