I am receiving the VIA error message, “Attempt to send heartbeats to the controller failed” after the VIA VPN becomes operational.
The Wireshark trace shows an ICMP message with Aruba heartbeat.
Frame 33: 69 bytes on wire (552 bits), 69 bytes captured (552 bits) on interface 0
Ethernet II, Src: ArubaNet_dd:11:40 (00:0b:86:dd:11:40), Dst: IntelCor_80:05:ac (34:02:86:80:05:ac)
Internet Protocol Version 4, Src: 192.168.53.100, Dst: 192.168.53.200
Internet Control Message Protocol
Type: 0 (Echo (ping) reply)
Code: 0
Checksum: 0x4cea [correct]
[Checksum Status: Good]
Identifier (BE): 1 (0x0001)
Identifier (LE): 256 (0x0100)
Sequence number (BE): 11352 (0x2c58)
Sequence number (LE): 22572 (0x582c)
[Request frame: 32]
[Response time: 4.183 ms]
Data (27 bytes)
0000 41 72 75 62 61 20 56 69 61 20 43 6c 69 65 6e 74 Aruba Via Client
0010 20 48 65 61 72 74 42 65 61 74 00 HeartBeat.
VIA version 3.2.3.0.107807
