I am having this situation and I don´t know if it have sense.
In HP 8206zl switch I have one VLAN (between others) like this:
ip address 192.168.50.1 255.255.255.0
untagged ethernet A1
*Interface A1 has no ethernet connected. It is empty.
If I made a "ping" to the ip address 192.168.50.1 from other machine in the network it answers ICMP.
But...if I quit the port A1 from vlan 50, and I put untagged on VLAN1 the ip 192.168.50.1 does not respond.
¿It´s normal? This IP address is gateway for one server in my network and pass through interface A20-A24 (trunk trk1).
Thanks in advance,
Hi, can you clarify "...from other machine in the network" part?
On some switches it's normal for a L3 interface to go down, if there's no single port in the VLAN active.otoh, this shouldn't happen when VLAN 50 is active on a trunk to another switch.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.