Wired Intelligent Edge

 View Only
last person joined: 20 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

VLANs with 3 HP 2910

This thread has been viewed 0 times

  • 1.  VLANs with 3 HP 2910

    Posted Mar 18, 2013 05:57 AM

    Hello,

     

    I'm planning to configure 6 VLANs with 3 HP 2910.

    All of this have to be internet capable trough  a firewall and not meant to communicate between each other.

    Is this possible? if this is, is this so difficult?

     

    Where can I find a guide or something to walk me trough the correct steps.

     

    BTW my experience in VLANs is zero.

     

    Thanks in advance


    #Trunk
    #2910
    #VLAN


  • 2.  RE: VLANs with 3 HP 2910

    Posted Mar 18, 2013 10:39 AM

    Hi arnau123,

     

    What you are wanting to achieve is possible, but one thing that you need to decide is where you are going to route your traffic. If you are going to use your firewall, then do you have a multi-interfaced firewall (one interface for each VLAN) or are you going to be setting up sub-interfaces on a single interface and restricting access between (sub-)interfaces with firewall rules? Or were you thinking of using the Layer3 capabilities of one of the 2910 switches to route traffic and then use ACLs to restrict traffic between VLANs?

     

    Let us know what you are able to achieve with your firewall and we can move on from there.