PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
Original Message:
Sent: Jul 25, 2024 08:23 AM
From: srenon33
Subject: VSX Aruba 8100
tu arrive à pinger le deuxieme coeur sur son IP ?
Oui
l'aggréga est bien monté ?
8100-1(config-if)# show lag brief
-----------------------------------------------------------------------
LAG Type Aggregate Mode Enabled Status Speed
Name Mode (Mb/s)
-----------------------------------------------------------------------
lag101 multi-chassis active trunk yes down auto
lag103 multi-chassis active trunk yes up 10000
lag256 inter-switch-link active trunk yes up 80000
8100-1(config-if)# show lag 256
System-ID : 9c:37:08:72:84:c0
System-priority : 65534
Aggregate lag256 is up
Admin state is up
Description : ISL link
Type : normal
Lacp Fallback : Disabled
MAC Address : 9c:37:08:72:84:c0
Aggregated-interfaces : 1/1/51 1/1/52
Aggregation-key : 256
Aggregate mode : active
Hash : l3-src-dst
LACP rate : slow
Speed : 80000 Mb/s
Mode : trunk
show vsx status
VSX Operational State
---------------------
ISL channel : In-Sync
ISL mgmt channel : operational
Config Sync Status : In-Sync
NAE : peer_reachable
HTTPS Server : peer_reachable
Attribute Local Peer
------------ -------- --------
ISL link lag256 lag256
ISL version 2 2
System MAC 02:01:00:00:01:00 02:01:00:00:01:00
Platform 8100 8100
Software Version LL.10.12.0006 LL.10.12.0006
Device Role primary secondary
Incompréhensible....
Original Message:
Sent: Jul 24, 2024 04:43 AM
From: alagoutte
Subject: VSX Aruba 8100
Bonjour Sébastien,
Je ne vois pas de souci coté de la configuration.
tu arrive à pinger le deuxieme coeur sur son IP ?
l'aggréga est bien monté ?
ca donne quoi show vsx status ?
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCL: Powershell Module to use Aruba Central
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
Original Message:
Sent: Jul 24, 2024 04:07 AM
From: srenon33
Subject: VSX Aruba 8100
Le primaire :
!
!Version ArubaOS-CX LL.10.12.0006
!export-password: default
hostname 8100-1
user admin group administrators password ciphertext BapYxCD9bEasDyarf7Z2XDaAlrVdNsqSg47S3tRugZuROvYgAAAF3Be+sFd7JT7HTwddYfQSQuvmOM3moWT6NDM6fNbuDi7xpFqRVwsjbwKDcp6lj4QlBG62cvR5uw4h2pIxkM4mR1VYjuDM/MuvEydaJoaKScrvwd7T8pRZueMxPxvETDdy0D
vrf KeepAlive
ntp server pool.ntp.org minpoll 4 maxpoll 4 iburst
ntp enable
!
!
!
!
!
!
ssh server vrf mgmt
vlan 1
vlan 2
name serveurs
vsx-sync
description serveurs
interface mgmt
no shutdown
ip dhcp
interface lag 101 multi-chassis
description vers_CDG2ISW01
no shutdown
no routing
vlan trunk native 1
vlan trunk allowed 1,2
lacp mode active
interface lag 256
description ISL link
no shutdown
no routing
vlan trunk native 1
vlan trunk allowed all
lacp mode active
interface 1/1/2
description vers_CDG2ISW01-1
no shutdown
lag 101
interface 1/1/48
no shutdown
vrf attach KeepAlive
ip address 10.250.99.1/30
interface 1/1/51
description ISL port 1
no shutdown
lag 256
interface 1/1/52
description ISL port 2
no shutdown
lag 256
interface vlan 1
vsx-sync active-gateways
ip address 10.10.0.11/24
active-gateway ip mac 12:01:00:00:01:00
active-gateway ip 10.10.0.1
interface vlan 2
description Serveurs
vsx-sync active-gateways
ip address 10.20.0.251/24
active-gateway ip mac 12:01:00:00:01:00
active-gateway ip 10.20.0.254
vsx
system-mac 02:01:00:00:01:00
inter-switch-link lag 256
role primary
keepalive peer 10.250.99.2 source 10.250.99.1 vrf KeepAlive
vsx-sync aaa acl-log-timer bfd-global bgp copp-policy dhcp-relay dhcp-server dns icmp-tcp lldp loop-protect-global mac-lockout mclag-interfaces neighbor ospf qos-global route-map sflow-global snmp ssh stp-global time vsx-global
https-server vrf mgmt
Le seondaire
!
!Version ArubaOS-CX LL.10.12.0006
!export-password: default
hostname 8100-2
user admin group administrators password ciphertext BapYxCD9bEasDyarf7Z2XDaAlrVdNsqSg47S3tRugZuROvYgAAAF3Be+sFd7JT7HTwddYfQSQuvmOM3moWT6NDM6fNbuDi7xpFqRVwsjbwKDcp6lj4QlBG62cvR5uw4h2pIxkM4mR1VYjuDM/MuvEydaJoaKScrvwd7T8pRZueMxPxvETDdy0D
vrf KeepAlive
ntp server pool.ntp.org minpoll 4 maxpoll 4 iburst
ntp enable
!
!
!
!
!
!
ssh server vrf mgmt
vlan 1
vlan 2
name serveurs
vsx-sync
description serveurs
interface mgmt
no shutdown
ip dhcp
interface lag 101 multi-chassis
description vers_CDG2ISW01
no shutdown
no routing
vlan trunk native 1
vlan trunk allowed 2
lacp mode active
interface lag 256
description ISL Link
no shutdown
no routing
vlan trunk native 1
vlan trunk allowed all
lacp mode active
interface 1/1/2
description vers_CDG2ASW01-2
no shutdown
lag 101
interface 1/1/48
no shutdown
vrf attach KeepAlive
ip address 10.250.99.2/30
interface 1/1/51
description ISL port 1
no shutdown
lag 256
interface 1/1/52
description ISL port 2
no shutdown
lag 256
interface vlan 1
vsx-sync active-gateways
ip address 10.10.0.12/24
active-gateway ip mac 12:01:00:00:01:00
active-gateway ip 10.10.0.1
interface vlan 2
description Serveurs
vsx-sync active-gateways
ip address 10.20.0.252/24
active-gateway ip mac 12:01:00:00:01:00
active-gateway ip 10.20.0.254
vsx
system-mac 02:01:00:00:01:00
inter-switch-link lag 256
role secondary
keepalive peer 10.250.99.1 source 10.250.99.2 vrf KeepAlive
vsx-sync aaa acl-log-timer bfd-global bgp copp-policy dhcp-relay dhcp-server dns icmp-tcp lldp loop-protect-global mac-lockout mclag-interfaces neighbor ospf qos-global route-map sflow-global snmp ssh stp-global time vsx-global
https-server vrf mgmt
Original Message:
Sent: Jul 23, 2024 10:27 AM
From: alagoutte
Subject: VSX Aruba 8100
Bonjour,
c'est quoi la configuration de ton cluster VSX ? sur les 2 8100 ?
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCL: Powershell Module to use Aruba Central
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
Original Message:
Sent: Jul 23, 2024 09:40 AM
From: srenon33
Subject: VSX Aruba 8100
Bonjour,
J'ai un cluster VSX de deux switchs 8100.
Lorsque j'éteins le primaire. Les active-gateway ne sont plus joignables sur le secondaire ni depuis les switchs connectés en lag mc dessus.
Je pense qu'il y a une ou deux choses qui m'échappent.
Avez vous des idées?
Merci par avance