Hello,
I need to configure a new profile of WAN scheduler with this parameter:
Q0: Strict priority . CoS 5
Q1: WRR . CoS 7 (1%)
Q2: WRR . CoS 3 (49%)
Q3: WRR . CoS 3 (50%)
I have done two options: first I have created another WAN profile, and second I have used the default Profile but I have changed the data.
I can see th profile correct:
(BGW-Aruba9004) *#show scheduler-profile default
scheduler profile "default"
---------------------------
Queue Weight Priority-map
----- ------ ------------
Queue 0 0 5 6
Queue 1 1 4 7
Queue 2 49 2 3
Queue 3 50 0 1
but when I see the datapath scheduler in the interface applied I can not see the correct classification.
(BGW-Aruba9004) *#show datapath scheduler interface 0/0/3
Datapath Transmit Scheduler Detail for interface 0/0/3:
Scheduler profile id: 1
CPU:1: Flags 0, 100003840 bps, Policed 0, Dropped 0 Queued 0/0, Avail Credit:24415
next_drr_q 4 first_drr_q: 4 drr_active_list: 0x0
Scheduler Queue Detail
----------------------
Queue SP/Drr-wt Priorities Head Tail Tx-Pkts Tx-Bytes Head Pkt Size Queue Count Quanta Deficit
----- --------- ---------- ---- ---- ------- -------- ------------- ----------- ------ -------
q0 SP 6 7 0 0 261463 26979623 0 0 0 0
q1 SP 4 5 0 0 0 0 0 0 0 0
q2 SP 2 3 0 0 0 0 0 0 0 0
q3 SP 0 1 0 0 40027 8284448 0 0 0 0
do you know what it could be?
My gateway version is 10.3.1.4
Regards
Rosa