Comware

 View Only
last person joined: 4 days ago 

Expand all | Collapse all

Unable to access comware switch via ssh, telnet or Console.

This thread has been viewed 20 times
  • 1.  Unable to access comware switch via ssh, telnet or Console.

    Posted Aug 19, 2022 04:51 AM
    We already rebooted the switch but this issue was still there.

    • We already preform factory default to this switch. then we are able to logon to the switch

    • Then we restore the previous backup, then again we are unable to access via SSH,TELNET & Console 

    • We are suspect when we running NTP Synchronization and Password Control Policy features both are together this issue is occur.(Because try to logon to the switch by disabling both NTP synchronization & Password control policy features we can access switch without any issue)

    • We need to clarify If there is any firmware related issue/bug in current comware version of the Switch?

    Please help me to resolve this issue

    Switch Model: HP 5130-24G-4SFP+EI,
    Part No: JG932A.
    current version (7.1.045, Release 3106) 

     



    ------------------------------
    DhanushkaH
    ------------------------------


  • 2.  RE: Unable to access comware switch via ssh, telnet or Console.

    Posted 25 days ago
    I appreciate the information and advice you have shared. I will try to figure it out for more.


  • 3.  RE: Unable to access comware switch via ssh, telnet or Console.

    Posted 13 days ago
    If you posted some config related to vty, aux lines and ssh would probably help understand your issue