Community Feedback

Greetings,

We're fairly new to the Aruba world. Our organization recently acquired Aruba 515 APs with Aruba 7205 controller for management. The IoT feature was the main reason we opted for Aruba as we needed a ZigBee network to manage our Assa Abloy locks. With a bit of reading, and trial and error, we managed to set up the controller and the APs. But now we have tried and failed to set up a ZigBee network. We have followed the few available guides online but no success so far. We have setup the ZigBee transport profile, ZigBee Service and ZigBee Radio. But the Assa Abloy locks are not sensing the ZigBee network.

1. Is there anyone here who has experience setting up a ZigBee network over an Aruba AP for Assa Abloy lock or something similar? Would you be kind enough to point us in the right direction? 

2. Is Mobility conductor required to enable the IoT (ZigBee, BLE) features of the APs?

I will appreciate any help, pointers.

Thanks

You will have much better chance if you posti in IoT community instead of Community Feedback. Check this post from Herman. And try in Internet of Things (IoT) and Industrial IoT (IIoT) community.

Best, Gorazd

Greetings,

We're fairly new to the Aruba world. Our organization recently acquired Aruba 515 APs with Aruba 7205 controller for management. The IoT feature was the main reason we opted for Aruba as we needed a ZigBee network to manage our Assa Abloy locks. With a bit of reading, and trial and error, we managed to set up the controller and the APs. But now we have tried and failed to set up a ZigBee network. We have followed the few available guides online but no success so far. We have setup the ZigBee transport profile, ZigBee Service and ZigBee Radio. But the Assa Abloy locks are not sensing the ZigBee network.

1. Is there anyone here who has experience setting up a ZigBee network over an Aruba AP for Assa Abloy lock or something similar? Would you be kind enough to point us in the right direction? 

2. Is Mobility conductor required to enable the IoT (ZigBee, BLE) features of the APs?

I will appreciate any help, pointers.

Thanks