Become a Member
I am trying to configure the SFP+ 10GbE ports on my 5412zl switch, that will be used solely for a dedicated iSCSI-based storage subnet. Should the iSCSI interface ports be configured with both of the following configuration entries? - spanning-tree admin-edge-port - enable flow-control -...
Hi folks. Good morning. I'm here to ask a question about the STP functioning. I have the following topology: 1 HP 5500 HI 48G as the core switch. (RSTP enable, BPDU guard enable) 7 HP 1910 48G (STP are disable on all switches. 5 of this 1910 are connected through a BAGG (fibre) of 2 Gb...
Hi, We have the following configuration: Switch 1 connected to WAN Firewall LAN Firewall connected to Switch 2 Switch 1 is a HP Procurve 2610 and Switch 2 is a HP Procurve 2910. STP is enabled, MRSTP in both. Firewall propagates MRSTP. There is only one VLAN (default VLAN). How many...
Hi Team, There will be an integration with 2 new HP 5820AF-24XG Switches with existing 15 Cisco 3560 switches. the new HP switches config is simply running PV RSTP and one configuring 1 IP address for management. I'd like to confirm with you, if there will be any compatability...
Thank you in advance for any time you can take to help me out here! So I am fairly new to HP STP and have never used the Loopback detection feature. Correct me if I am wrong here, but my understanding is that STP can create redundancy and detect loops (rather makes a backup link but...