Access Points

Reply
Highlighted
New Contributor

AP latency to remote controller

Is there a Aruba document that shows the maximum latency for a Aruba 135 and 105 deployed at a remote site with no local controller connecting to a 7200 series controller over the WAN?
Or a Aruba document that has best practices outlined for a regional deployment?
Highlighted
MVP Expert

Re: AP latency to remote controller


You can read this doc doesn't specifically talks about the 135/105 to 7200 connection from a remote location but addresses some of your questions in regards best practices for remote locations

http://www.arubanetworks.com/wp-content/uploads/RAPVRD_version_8.pdf
How do you have the VAP configured ? Tunnel / split tunnel ?
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Guru Elite

Re: AP latency to remote controller

New Contributor

Re: AP latency to remote controller

Thank You